Failed Tail Lights in an Audi

Posted on | 22 Feb 2019 By Anita Gaal

Any kind of car trouble can be frustrating, especially when you’re the owner of a luxury vehicle like an Audi. You should be able to drive at any time without having any safety concerns, but if the tail lights in your Audi have failed it can be a safety hazard to you and other drivers. In most cases of tail light failure, a light on the dashboard will illuminate when any of your lights fail, or another driver may point it out. However, even if you’re aware of the faulty or failing lights, fixing the problem may be more difficult than changing out the light bulbs.

Tail lights are essential to the safety of you and other drivers on the road, and failed tail lights or brake lights can cause accidents or get you pulled over. None of these situations are ideal, so understanding the causes of tail light failure can help to prevent or solve this issue. The tail lights in your Audi could fail due to a number of issues within the hardware and wiring connected to the tail lights, so it’s important to be aware of the most common causes of tail light failure. In this article, we’ll go over some of the most common reasons for tail light failure in an Audi.

Old, Burnt, or Blown Out Light Bulbs

The most common cause of tail light failure in an Audi is due to burnt out light bulbs. This may explain why some of the lights are still operational. For example, if a tail light is failing to illuminate but the brake light is still functioning the failure may be due to something as simple as a burnt out bulb. If the bulbs have burnt or blown out, they will need to be replaced. Consider replacing classic bulbs with LED lights, because they last longer and produce a brighter light. It was easy to replace tail and brake lights in most older vehicle models, but more contemporary Audis will need to be taken to an experienced specialist for any tail light repairs.

Fuse Box Issues

If there is a blown-out fuse or problem with the fuse box, it will affect the tail lights in your Audi. It will be difficult to diagnose a blown-out fuse in a newer Audi, so the best course of action is to bring your vehicle to a trusted Audi repair shop which can change out the blown fuse for a new one. If your tail lights are failing due to a blown fuse, check in with the specialist assisting you and ask about what could have caused the blow-out. If the source of the problem isn’t identified, the problem may occur again.

Damaged Wiring and Other Electrical Issues

Failed tail lights in an Audi may be the result of damaged wiring or other electrical issues within the vehicle. If you’re experiencing tail light failure in addition to any other electrical issues, the wiring within the electrical system of your Audi may be damaged. In this case, an expert mechanic would have to take care of any electrical or wiring issues within the vehicle.

Tail light failure can be the result of a number of issues with your vehicle, ranging from something as simple as a burnt-out light bulb, or something as complex as electrical issues within your vehicle. It can be difficult to figure out why the tail lights in your Audi have failed, so it’s best to bring your vehicle to a trusted specialist who can provide the necessary service to your vehicle.

The team at Euro Automotive has years of experience providing the highest quality of service for European makes. We understand the importance of having a vehicle that performs well, which is why we pride ourselves on our attention to detail and honesty. Our commitment to stellar customer service has impressed European car owners all over Texas, with many of our clients coming from Dallas, Garland, Arlington, and Fort Worth. We believe in providing the highest quality of service and repair to all of our clients, and we do everything we can to ensure your vehicle is running smoothly. Our specialists are the most qualified in the area, so if you’d like to build a business relationship with our experts please contact us. If the tail lights on your Audi have failed, call us right away.

* Audi Q5 Tail Light image credit goes to: vesilvio.

What is the Role of Your Car’s Hub Assembly?

Posted on | 5 Feb 2019 By Anita Gaal

The wheels are among the most important parts of any car because without them the car wouldn’t be able to move. The entire purpose of a vehicle is to provide safe transportation, and cars can only do this because they are on properly turning wheels. However, there are many components that aid in the performance of a car, including systems that are regulated by the rotation of the wheels. Because of this, the wheel hub assembly is very important to the safety and basic function of any car. Without it, your car wouldn’t be able to act as a safe, drivable vehicle. In this article, we will go over the role of your car’s wheel hub assembly, and explain why it is important.

Function of the Wheel Hub Assembly

The wheel hub assembly is a key component of the steering system. It acts to keep your wheel attached to the car and allows the wheel to turn freely. The wheel hub assembly is found at the center of each wheel, and the purpose of the wheel hub assembly is to house the wheel bearings. Bearings are used to assist in the smooth rotation of an object, so without wheel bearings, the wheels on your car wouldn’t turn with ease. The main function of the wheel hub assembly is to house bearings, which keep the wheels running smoothly. Without the hub assembly, the car would not be able to perform as a vehicle. In addition to housing bearings, the hub assembly is also responsible for housing speed sensors that control the car’s anti-lock braking system. Your car’s traction control system also relies on the same speed sensors used by the anti-lock braking system. These two systems work in tandem to ensure you have control over your vehicle. Without a properly functioning hub assembly, your anti-lock braking system and traction control would be compromised, leading to a car that would be unsafe to operate.

Importance of the Hub Assembly

Although the hub assembly is rarely seen, it is critical to the performance of the car. The hub assembly is responsible for ensuring that each ride is smooth, and impacts other aspects of the car’s performance, such as fuel economy and the integrity of the anti-lock braking system, also known as the ABS. To ensure that a car is safe and functional, all of these qualities need to work together with ease. They are able to do so because of the hub assembly, making it an essential component of a car’s performance. Because of this, a quality hub assembly is a key component of a safe and functioning vehicle.

What can happen if you drive with a damaged wheel hub assembly?

Driving with a damaged or faulty wheel hub assembly is very dangerous, and can lead to ABS and traction system failure. If the bearings inside of the hub assembly become worn out, the wheels on your car will not turn smoothly. Your car might become unstable, and the wheels might not be secure. In addition, if the hub assembly becomes damaged or faulty, the steel in the assembly might give way, which could lead to your wheel becoming detached from the vehicle. If you suspect that you have a failing or damaged hub assembly, you might want to take your car to a qualified, trusted mechanic for service.

Let Euro Automotive Help

If your car is showing any signs of hub assembly damage or failure, Euro Automotive can take care of it. In order to keep our clients safe, we install the highest quality wheel hub assemblies, to ensure the safety and comfort of all of our clients.

The team at Euro Automotive has years of experience with a wide variety of European vehicles, and we can ensure that your hub assembly is in great condition. We understand the importance of having a car that runs well. Our commitment to stellar customer service has impressed European car owners all over Texas, with many of our clients coming from Dallas, Garland, Arlington, and Fort Worth.

We believe in providing the highest quality of service and repair to all of our clients, and we do everything we can to ensure your vehicle is running smoothly. Our specialists are the most qualified in the area, so if you’d like to consult with our experts, please contact us. If you’re concerned about the quality or health of your hub assembly, please contact us right away.